Force Sensor
- 产品介绍
- Typical experiment
- Download
Introduction
♦ The sensing component of Force Sensor is a resistance strain gauge. It is attached to the metallic cross girder. It measures the force from two directions when the cross girder is deformed. The sensor converts force signal into voltage signal via resistance strain gauge. After circuit amplifying, it can accurately measure force value.
Usage
♦ Connect Force Sensor to universal input. Connect universal input to any port in SenseDisc.
♦ Force Sensor can measure both pulling force and pressure. When pulling force is applied, it shows positive value. When pressure is applied, it shows negative value.
♦ Force Sensor should be calibrated before using. Refer to calibration.
Notes
♦ Force Sensor needs to be calibrated before using.
♦ Keep the direction of measured force vertical to the front panel of sensor to ensure the accuracy.
♦ Please keep the force applied to the sensor not exceeding measuring range during measuring. Otherwise it may damage the Force Sensor.
♦ Do not screw the hook too deep. Otherwise it will affect the accuracy.
Typical experiment
Typical experiment
♦ Buoyancy law
Others
♦ Explore the Hooke’s law.
♦ Newton’s third law.
♦ Overweight and weightlessness.
♦ Explore the simple harmonic motion.
