Force Sensor
- 产品介绍
- Typical experiment
- Download
Introduction
♦ Force Sensor can be used to measure pulling force and pressure. When pulling force is applied on metal hook, positive value is displayed. When pressure is applied on the metal hook, negative value is displayed. During using, make sure the force direction is vertical to the front surface of sensor otherwise the measured value will not be accurate.
Usage
♦ There are two threaded hole on Force Sensor (M6). The threaded hole 2 is used with through-hole at front side to fix it on holder. You can also fix it on L shaped holder using these two threaded holes.
Notes
♦ Force Sensor needs to be calibrated before using.
♦ Keep the direction of measured force vertical to the front panel of sensor to ensure the accuracy.
♦ Keep the Force Sensor dry.
♦ Please keep the force applied to the sensor not exceeding measuring range during measuring. Otherwise it may damage the Force Sensor.
Typical experiment
Typical experiment
♦ Newton’s third law
Others
♦ Explore the Hooke’s law
♦ Theorem of momentum
♦ Metal expands by heat and contracts by cold
♦ Explore the simple harmonic motion
♦ Overweight and weightlessness
♦ Archimedes’s floating law
