CO2 Sensor

Name: CO2 Sensor

Type: ZC1007

Port: USB port

Accuracy: 0~5000ppm               3%
5000~50000ppm       4%
50000~100000ppm   6%

Range: 0～100000ppm

Resolution: 2ppm

Function: It is an infrared gas absorbing detecting sensor. It can detect the CO₂content in real time.

产品介绍
Typical experiment
Download

Introduction

♦ ZC1007 CO2 Sensor is an infrared gas absorbing detecting sensor. It can detect the CO₂content in real time.

Usage

♦ CO2 Sensor can be used once connected to related device and software opened.

♦ It has good selectivity, high sensitivity, no oxygen dependence, long service life, low power consumption without preheating by comparing with the chemical sensor.

♦ The gas diffusion is a slow process. Therefore the reading will be delay.

Notes

♦ Calibrate the sensor periodically which should not be greater than 3 month.

♦ Try not to impact testing result by exhaled CO₂.

♦ If liquid flows into the probe, it will destroy the sensor completely. Try not to use the sensor under condition which is full of dust.

♦ Use container as small as possible when doing experiment because it will be easier to collect CO₂. Reserve the probe in a place without CO₂due to the working principle of probe. When it is placed inside room, it can be stored by 2 years.

♦ If the value still not correct after first reset of probe, it has to be calibrated again after at least two minutes. If it still wrong, you have to switch it off for at least 30 minutes to calibrate it again.