Dipmeter
- 产品介绍
- Typical experiment
- Download
Introduction
♦ Dipmeter can be used to measure amplitude of force and rotating angle of sensor simultaneously. When pulling force is applied on metal hook, positive value is displayed. When pressure is applied on the metal hook, negative value is displayed. When the hook of sensor is placed vertical, the angle measured is 0. When the sensor is deflected, relative angle value can be measured.
Usage
♦ It can be connected to computer using USB cable or Bluetooth without external datalogger.
Notes
♦ Dipmeter needs to be calibrated before using.
♦ During using, make sure the force direction is vertical to the front surface of sensor otherwise the measured value will not be accurate.
♦ Please keep the force applied to the sensor not exceeding measuring range during measuring. Otherwise it may damage the Dipmeter.
Typical experiment
Typical experiment
♦ Composition and Resolution of Force
