CO2 Sensor

Name: CO₂ Sensor

Type: S1007

Port: Lightning

Accuracy: (0~5000ppm) 3%

(5000~50000ppm) 4%

(50000~100000ppm) 6%

Range: 0～100000ppm

Resolution: 2ppm

Function: It's used to measure CO2 content in the air. It's measurement is sensitive, accurate and quick.

产品介绍
Typical experiment
Download

Introduction

♦ CO₂ Sensor is infrared gas absorption and testing sensor. It has good selectivity, high sensitivity, oxygen free dependent, long service life, low power consumption and no preheating requirement.

Usage

♦ Connect universal input to any port in SenseDisc.

♦ Connect CO₂ Sensor to universal input.

♦ Place the sensor into the environment to be measured to collect data. Data display will be delay for 3~5 seconds.

Notes

♦ Try not to impact testing result by exhaled CO₂.

♦ If liquid flows into the probe, it will destroy the sensor completely.

♦ Try not to use the sensor under condition which is full of dust.

♦ CO₂ is heavier than air so that it will sink to bottom of bottle. Use container as small as possible when doing experiment because it will be easier to collect CO₂.