Millivolts Voltage Sensor
- 产品介绍
- Typical experiment
- Download
Introduction
♦ Millivolts voltage Sensor is used to measure the electric potential difference at both ends of the electrical equipment or circuits. Millivolts voltage Sensor divides the voltage so as to measure the electrical potential difference in DC circuit and low-voltage, low-frequency AC circuit.
Usage
♦ Connect Voltage Sensor to any port in SenseDisc.
♦ Connect red and black alligator clips to positive and negative poles in Voltage Sensor.
♦ Parallel connect Voltage Sensor into circuit.
♦ Voltage Sensor should be calibrated before using. Refer to calibration.
Notes
♦ Voltage Sensor should be parallel connected to the circuit during using.
♦ Voltage Sensor needs to be calibrated before using.
♦ The maximum voltage can be applied to sensor is 5V.
Typical experiment
Typical experiment
♦ Electromagnetic induction phenomenon
♦ Primary cell experiment
